S1 Digital Bluetooth Pairing Process

So long as the device you want to connect to via Bluetooth supports the appropriate Bluetooth version (2.1 or higher and EDR) and the appropriate Bluetooth profiles (A2DP, HSP, HPF, AVRCP) you should have connectivity with your S1 Digital headset. Please make sure your device is supporting the appropriate Bluetooth version and Profiles. Depending on your device you may need to manually turn these profiles on. NOTE: Sometimes an update will have occurred on the device that you are connecting to and it requires the device to be rebooted before the headphones will connect.

To pair the S1 Digital please use these steps:

  1. Ensure batteries are in the headset and correctly aligned and securely in place.
  2. Slide the ANR (Active Noise Reduction) to "ON" and a the LED indicator light will turn on. 
  3. Press and hold the Sennheiser logo in middle of control until it flashes alternating RED and BLUE. 
  4. Make sure device's Bluetooth is on and wait for it to locate the Sennheiser S1 Digital.

NOTE: The ANR (Active Noise Reduction) must be on in order for the Bluetooth function to work. If you are not connected into a plane the ANR (Active Noise Reduction) will not turn on unless you open the battery box and switch the auto shut off to the "OFF" position. Once you have done this you will see a light to indicate that the ANR (Active Noise Reduction) is on without the ANR (Active Noise Reduction) actually being on.

NOTE: This process is outlined on Page 13 of the instruction manual.

  • 53
  • 03-Jul-2015
  • 324 Views