The Team Connect Ceiling microphone has 2 balanced analogue microphone level outputs on a 3 pin Phoenix connector. Both output the same signal simultaneously.
Because of this, the microphone can be connected to any DSP or VC solution which has an analogue microphone input.
Or, by using an analogue to Dante converter (such as the Sennheiser SL DI 4 XLR) it can be connected via Dante to your DSP.
Additionally the microphone has a 6 pin connector for control, including on status, hook status and mute status.
Power is provided by an external 24V power supply, which is included in delivery with the SL ceiling mic.
Details of all the connection requirements can be found in the specification sheet attached.